Spliter de Retea Industrial Planet, Protectie IP 30, 1 Port 10/100/1000Mbps cu 802.3 at PoE, (-40 la +75 Gr C) - IPOE-162S

Cod: IPOE-162S

The Best Industrial Grade Data Link and Power Sourcing for Non-PoE Solution
The IPOE-162S is an Industrial High Power PoE Splitter that can split the 48~56V DC over the existing Ethernet cable into the selectable 12V or 24V DC power output. It supports passive 10/100/1000Mbps Ethernet connection ability and complies with IEEE 802.3at High Power over Ethernet standard that supports up to 25 Watts output power to powered device. To fulfill the growing industrial applications, the IPOE-162S is designed to work under the operating temperature range from -40 to 75 Degree C (-40 to 167 Degree F). The IPOE-162S is an ideal solution to transfer power to traditional network device with high power demand directly without the need to install additional power outlets and electrical cabling in the industrial environment.

Innovative Selectable DC Power Output Voltage
Via the innovative 12 volt / 24 volt DIP switch on the front panel, the IPOE-162S can supply either 24V DC power to industrial equipment or 12V DC output to the common network devices, such as wireless Access Point or IP camera. It highly increases the flexibility of the product applications.

Dual Power Output Capability
By supporting up to 25 Watts 802.3at Power over Ethernet cable, the IPOE-162S can satisfy not only single power-hungry equipment but also able to share the 25 Watts output power to two non-PoE Ethernet devices simultaneously through a 4-Pin terminal block. For example, the two power output can be applied as below to completely solve the need of electric source:
    ■ IP Camera (Power 1) + Outdoor housing with fan and heater (Power 2)
    ■ IP Camera (Power 1) + Pan & Tilt Motor (Power 2)
    ■ Analog Camera (Power 1) + IP Video Server (Power 2)

Environmentally Hardened Design
With compact, slim type IP30 industrial case protection, the space saving Industrial High Power PoE Splitter IPOE-162S can be placed in almost any difficult environment. It allows either DIN rail or wall mounting for efficient use of cabinet space. Being able to operate under the temperature range from -40 to 75 Degree C, the IPOE-162S is the ideal product for co-working with Industrial High Power Injector which can feed the power to Non-PoE devices up to 100 meters (328 feet) away on those harsh environments.

Plug and Play, Easy Cabling Installation
With IEEE 802.3at Gigabit High Power over Ethernet devices installed, the system administrator only has to use one single RJ-45 Ethernet cable to carry both power and data to each device. Besides, connect through the Industrial High Power PoE Injector with the IPOE-162S, you could also have benefits including cost saving, easy networking planning and high network reliability.


The IEEE 802.3at Injector and Splitter Installation
Due to the capability of IEEE 802.3at standard, the IPOE-162S can co-work with the IEEE 802.3at Gigabit PoE injector devices (like PLANET POE-161), High Power Switch or High Power Media Converter and transform non-PoE equipment to IEEE 802.3at PoE application. For a place where is hard to find the power inlet, the High Power PoE devices and the IPOE-162S operate as a pair to provide the easiest way to power your Ethernet devices that need high power input, such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome Camera, color touch- screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points.

Hardware Specification
Interface “PoE (Power + Data)” Input Port : 1 x RJ-45 10/100/1000Base-T
“Data” Out Port: 1 x RJ-45 10/100/1000Base-T
DC Out Plug Connector: 1 removable 4-Pin terminal block
LED Indicator System: Power Ready x 1 (Green)
Network Cable 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6
Distance up to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m)
Data Rate 10/100/1000Mbps
(vary on Ethernet device attached)
DIP Switch 12V DC / 24V DC output voltage
Power Input 802.3at PoE 48~56V DC
Power Output 12V / 24V DC, Max 2A (adjustable)
Dimension (W x D x H) 135 x 87.8 x 32 mm
Weight 421g
Enclosure IP30 Metal Case
Installation DIN Rail Kit and Wall Mount Ear
ESD / EFT Protection 6KV DC
Power over Ethernet
PoE Standard IEEE 802.3at High Power over Ethernet
Number of device can be powered 1 or 2
(Vary on Device’s Power Requirement, DC1 + DC2 can not over 25Watts )
Standards Conformance
Standards Compliance IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3at High Power over Ethernet
Regulation Compliance FCC Part 15 Class A, CE
Stability Testing IEC60068-2-32(Free fall)
Operating Temperature -40 ~ 75 Degree C
Storage Temperature -40 ~ 85 Degree C
Humidity 5 ~ 95% (Non-condensing)
Data Tip Model Versiune Descriere Download
Nu s-au gasit rezultate