Controler pt AP Wireless cu 24-Port 802.3at PoE + 4-Port 10G SFP+ - WAPC-2864HP

Cod: WAPC-2864HP

Controler pentru acces pointuri Wireless cu 24 porturi gigabit cu 802.3at PoE, 4 sloturi 100/1000BASE-X mini-GBIC/SFP, 4 sloturi 10GBASE-SR/LR SFP+, manageriaza max 64 AP-uri, max 10 grupuri (fiecare grup cu max 64 AP-uri)  

Wireless Management Solution in All Aspects
PLANET WAPC-2864HP, a brand-new Wireless Access Point Controller, features smart AP control, L2+/L4 IP management and intelligent PoE capability to enable service providers and IT managers to control all wireless APs at the same time in small and medium wireless network environments, such as hotels, villas, resorts and any public area. The WAPC-2864HP provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit Switching engine along with 24 10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+, 4 shared Gigabit SFP slots and 4 10G SFP+ uplink slots. Its simplified deployment and management ease the integration of devices into the existing wired and wireless networks.

Centralized Remote Control of Managed APs
PLANET Wireless AP Controller features centralized remote control of managed APs without needing to manually configure each AP for the wireless SSID, radio band and security settings. With one click of the mouse for the one-time configuration of the WAPC-2864HP’s wireless parameters, wireless settings of multiple APs can be simultaneously established to minimize deploying time, effort and cost.

Optimizing Wireless Network within Minutes
The WAPC-2864HP offers a user-friendly Web GUI for easy configuration. It enables wireless IT managers to complete a five-step configuration process of multiple APs. Through this Web interface, the wireless IT managers can discover manageable APs on the networks first, edit AP profiles and then apply the profiles to selected AP or AP group. Following these steps, configurations for multiple APs can be done in just a few minutes.

Wireless AP Cluster Management
The WAPC-2864HP supports wireless AP cluster management, which enables the central management of a group of wireless APs at one time. According to requirements, wireless APs can be flexibly expanded or removed from a wireless AP group in the future.

Centralized Power Management for Wireless AP Networking
The 24 Gigabit PoE ports of the WAPC-2864HP can be used to provide power directly to APs that connect to the AP controller. Each of the 24 Gigabit ports provides 30 watts of power, which means a total power budget of up to 440 watts can be utilized simultaneously without considering the different types of PoE applications being employed. It provides a quick, safe and cost-effective Power over Ethernet network solution to Access Points for small businesses and enterprises.

Built-in Unique PoE Functions for AP Power Control
As a managed PoE Switch for stable and reliable wireless AP operation, the WAPC-2864HP features special PoE Management functions:
■ AP Alive Check
■ Scheduled AP Power Recycling
■ PoE Schedule
■ SMTP/SNMP Trap Event Alert

Intelligent PoE AP Alive Check
The WAPC-2864HP can be configured to monitor c
onnected AP status in real time via ping action. Once the AP stops working and responding, the WAPC-2864HP will recycle the PoE port power and bring the AP back to work. It will greatly enhance the network reliability through the PoE port resetting the AP’s power source and reduce administrator management burden.

PoE Schedule for Energy Saving
The “PoE schedule” function enables wireless IT managers to activate or inactivate PoE power feeding for each PoE port during specified time intervals, which is a powerful function to help SMBs or enterprises save power and money.

Cost-effective 10Gbps Uplink Capacity
10G Ethernet is a big leap in the evolution of Ethernet. The fpur 10G SFP+ slots of the WAPC-2864HP support Dual-speed, 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.

Robust Layer2 Features
The WAPC-2864HP can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop protection, IGMP/MLD snooping, Layer 2/4 QoS, and bandwidth control. The WAPC-2864HP allows the operation of a high-speed trunk with multiple ports and supports connection fail-over as well.

Powerful Security
The WAPC-2864HP offers comprehensive layer 2 to layer 4 access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x port-based and MAC-based users and device authentication.

Enhanced Security and Traffic Control
The WAPC-2864HP also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now build highly-secure corporate networks with considerably less time and effort than before.

User-friendly Secure Management
For efficient management, the WAPC-2864HP is equipped with console, Web and SNMP management interfaces. With the built-in web-based management interface, the WAPC-2864HP offers an easy-to-use, platform independent management and configuration facility. Moreover, the WAPC-2864HP offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can have the packet content encrypted at each session.

Centralized AP Management for Enterprises
When service providers deploy a large number of wireless APs in buildings such as hotel, villas, resorts and more, PLANET WAPC-2864HP Wireless Access Point Controller helps service providers and IT managers control all wireless APs at the same time. The WAPC-2864HP enables administrators to effectively manage up to 64 controlled wireless access points in different locations. The administrator can automatically discover, configure, update and monitor all the managed APs through one single browser-based web user interface. Such design avoids the need to configure the wireless APs one by one.

Hardware Specifications
Copper Ports 24 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP (Mini-GBIC) supports 100/1000Mbps Dual mode DDM, shared with Port-21 to Port-24
SFP+ Slots 4 10GBASE-SR/LR SFP+ interface
Compatible with 1000BASE-SX/LX/BX SFP transceiver
Console Port 1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 128Gbps/non-blocking
Switch Throughput 95Mpps@64Bytes
Address Table 16K entries, automatic source address learning and ageing
Shared Data Buffer 32M bits
Flow Control IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10Kbytes
Reset Button < 5 seconds: System reboot
> 5 seconds: Factory default
Dimensions (W x D x H) 440 x 300 x 44.5 mm, 1U height
Weight 4887g
LED Power, fan alert,
10/100/1000 Link/Act per RJ45 port,
100/1000 Link/Act per SFP port,
PoE-in-Use for Port 1~ 24
Power Consumption 502 watts/1712.8 BTU Max.
Power Requirements 100~240V AC, 50/60Hz
ESD Protection 6KV DC
Enclosure Metal
Fan Smart fan x 2 (Speed depending on operating temperature)
Wireless AP Management
Maximum Managed APs 64
Maximum AP Groups 10
Maximum APs per AP Group 64
Compatible Access Points ■ WDAP-C7200AC
■ WDAP-W7200AC
■ WNAP-C3220A
■ WNAP-W2201A
Encryption Security ■ WEP (64/128-bit) encryption security
■ WPA Personal/Enterprise (TKIP/AES)
■ WPA2 Personal/Enterprise (TKIP/AES)
■ Enterprise Class 802.1x
Centralized AP Management ■ AP auto discovery
■ Remote AP power reboot
■ AP auto IP assignment
■ AP group management
■ AP status monitoring
■ AP real-time traffic monitoring
■ AP device name/location editing
Power over Ethernet
PoE Standard IEEE 802.3af PoE/802.3at PoE+ PSE
PoE Power Supply Type End-span
PoE Power Output Per port 52V DC, max. 36 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 440 watts (max.) @ 25 degrees C
380 watts (max.) @ 50 degrees C
PoE Ability ■ PD @ 7 watts 24 units
■ PD @ 15.4 watts 24 units
■ PD @ 30.8 watts 14 units
Layer 2 Functions
Port Configuration Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status
Port Mirroring TX/RX/both
Many-to-1 monitor
VLAN 802.1Q tagged based VLAN
802.1ad Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation IEEE 802.3ad LACP/static trunk
14 groups of 8-Port trunk supported
Spanning Tree Protocol STP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
QoS Traffic classification based, strict priority and WRR
8-level priority for switching
- Port number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP packet
IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
IGMP Querier mode support
MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast groups
MLD Querier mode support
Access Control List IP-based ACL/MAC-based ACL
Up to 256 entries
Bandwidth Control Per port bandwidth control
Ingress: 100Kbps~1000Mbps
Egress: 100Kbps~1000Mbps
Layer 3 Functions
IP Interfaces Max. 128 VLAN interfaces
Routing Table Max. 32 routing entries
Routing Protocols IPv4 hardware static routing
IPv6 hardware static routing
Management Functions
Basic Management Interfaces Console/Telnet/Web browser/SNMP v1, v2c
Secure Management Interfaces SSH, SSL, SNMP v3
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 4292 IP Forward MIB
Power over Ethernet MIB
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1ad Q-in-Q VLAN stacking
IEEE 802.1X Port Authentication Network Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.1ab LLDP
RFC 791 IP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
FRC 3810 MLD version 2
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Data Tip Model Versiune Descriere Download
Nu s-au gasit rezultate